W11176140 Washer Control Board for Whirlpool & Kenmore – Replaces W11189137, AP6286840, EAP12348800 – Fixes Error Codes, Cycle Issues, Unresponsive Buttons – Heavy-Duty PBT – Easy DIY Installation
$299.99
Direct replacement W11176140 washer control board for Whirlpool and Kenmore. Fixes error codes, cycle failures and unresponsive buttons. Easy DIY install.
Out of stock
The Brain of Your Washer – When It Fails, Everything Stops
The washer control board is the electronic brain of your washing machine. It manages every function — filling, washing, draining, and spinning. It contains all the circuitry needed to run your wash cycles, control the timer, and run diagnostic routines. When it fails, the entire machine becomes unresponsive.
The W11176140 washer control board is a premium replacement built with heavy-duty PBT material that offers excellent heat resistance and long-term durability. It meets or exceeds OEM specifications, ensuring reliable performance for years to come.
🔴 Signs Your Washer Control Board Is Failing
1. Washer Won’t Start or Complete Cycles
The machine may fill with water but never advance to the wash or spin phase — or it may stop mid-cycle with no apparent reason.
2. Unresponsive Buttons
Pressing cycle select, start, or options does nothing. The control panel seems “dead” even though the machine has power.
3. Error Codes on Display
Your washer flashes error codes that point to a main control board failure. Common codes include communication errors between the UI and the main board.
4. Can’t Select Cycles or Options
The dial or touchpad doesn’t respond, or the washer defaults to a single cycle regardless of what you select.
5. Intermittent Power Failure
The washer turns off mid-cycle, resets itself randomly, or loses power briefly before restarting.
Key Features
🧠 Direct Replacement – Plug & Play
Designed as a one-to-one replacement for the original control board. Simply disconnect the old board, mount the new W11176140, reconnect the wiring harness, and test. No programming or special tools required.
🏗️ Heavy-Duty PBT Material
Manufactured from high heat-resistant PBT (polybutylene terephthalate) — a rugged engineering-grade plastic that withstands the heat, humidity, and vibration found inside your washer’s control panel. Built to outlast standard boards.
🔧 Easy DIY Installation
With basic hand tools and an online repair video, most homeowners complete this repair in under 30 minutes. No electrician, no technician, no service call.
⚠️ Safety First: Unplug your washer before starting the repair and wear work gloves for protection.
Compatibility
| Brand | Compatible Models |
|---|---|
| Whirlpool | WET4024HW0 • WET4124HW0 • YWET4024HW0 |
| Kenmore | 11081442710 • 11081452710 |
⚠ Always verify your washer’s model number before ordering. The model number is usually located on a label inside the door frame or on the back panel.
Replaces OEM Part Numbers
W11189137 • AP6286840 • EAP12348800 • PS12348800 • 4813718
What’s Included
- 1× W11176140 Washer Control Board
Installation Tips
- Unplug the washer from the electrical outlet
- Remove the control panel — typically held by screws on the back of the console
- Disconnect the wiring harness from the old board — take a photo first so you remember the connections
- Remove the old board and mount the new W11176140 in its place
- Reconnect the wiring using your reference photo
- Reassemble the panel, plug the washer back in, and run a test cycle
Frequently Asked Questions
Q: How do I know if the control board or something else is broken?
A: If your washer has power (lights come on) but doesn’t respond to button presses, skips cycles, or shows error codes — the control board is the most likely culprit. If the washer has no power at all, check the outlet and power cord first.
Q: Does this control board need programming after installation?
A: No. This is a direct replacement board. Once connected, your washer should operate normally without any programming or configuration.
Q: Will this fix my washer if it’s not draining?
A: Not necessarily. A no-drain issue could be caused by a clogged pump, a broken belt, or a faulty drain motor. However, if the control board is not sending the drain signal, this replacement will resolve it. We recommend diagnosing the issue before purchasing.
Q: What’s the warranty?
A: This part is backed by TSIGUOQURU’s satisfaction guarantee. If you have any issues with fit or function, contact our support team and we’ll respond promptly.
About TSIGUOQURU
TSIGUOQURU focuses on home improvement and repair replacement parts, providing reliable, practical appliance components. We carefully select durable, highly compatible parts to help homeowners and repair professionals complete maintenance and repairs efficiently.
Reviews
Clear filtersThere are no reviews yet.